looking for gas tank and steering wheel/hub

looking for a steering wheel with hub and a square tank for an 80's craftsman lawn tractor. something like these



Shipping to 47122

Thanks for looking,
-Josh

I do have all that stuff....send me a pm

I also have this stuff

redzz02 wrote:

I also have this stuff

Thanks for the reply.
I'm working with mrshaft696 right now on the bulk of it but there were a couple things i forgot to mention i was looking for. If you have a couple of the connectors to mate with the ones in the following pic, with a bit of pigtail wire on them, I could still use them. They would plug into one another, so they could come from either the harness side or the engine side theoretically. The engine in the photo is a briggs 13HP:


Thanks,
-Josh

I do have the pigtails but I save them for myself, sorry

redzz02 wrote:

I do have the pigtails but I save them for myself, sorry

No worries man, think i'm going to cut the solenoid/kill wire one and use that to tie in to the alternator one so i don't have to disturb the diode. figure i can just crimp on some connectors where i cut the plug out.

Maybe go to a local auto part store to see if they have the right connectors. They won't be the plug but would be the individual connectors inside the plug.

prancstaman wrote:

Maybe go to a local auto part store to see if they have the right connectors. They won't be the plug but would be the individual connectors inside the plug.

if you get the bullet type connectors they will plug right into those i think....

mrshaft696 wrote:

prancstaman wrote:

Maybe go to a local auto part store to see if they have the right connectors. They won't be the plug but would be the individual connectors inside the plug.

if you get the bullet type connectors they will plug right into those i think....

Thanks Guys, I'll take a look next time i am by there. I bet they have something