Started on my little extension out the front. Tacked the braces before burning it in. Welds under are terrible but will hold just fine. Need to work on my non-flat welding.
I did feel that I somewhat redeemed myself welding up the front plate for the extenstions.
cleaned up.
Now I need to clean up the axle hanger so I can weld it in so I can have a roller again. Then I need to plan out the bell-crank. I didn't plan on that earlier. Hope that works out ok.
PROJECTS: Marshal ........................93 Craftsman GT6000 Red Bandit ...................72 Wheel Horse Raider 12 Dirty Rat........................77 Sears Suburban Bowser...........................01 Murray Widebody LT The Green Machine ....1990 Craftsman II GT18 Other projects
couple current shots. I have it set halfway between 1/8 and 3/16 steel. I was welding some 1/8 to 3/16 and that made sense and seemed to work as planned. The black dot is my dialed in spot for 1/8 metal.
PROJECTS: Marshal ........................93 Craftsman GT6000 Red Bandit ...................72 Wheel Horse Raider 12 Dirty Rat........................77 Sears Suburban Bowser...........................01 Murray Widebody LT The Green Machine ....1990 Craftsman II GT18 Other projects
it's a little nerve racking committing to modifications sometimes ! But you just have to jump in and do it and hope it turns out like you see it in your vision.
MightyRaze wrote:
Well, I am committed to the extension now!
MightyRaze Administrator
2017 Build-Off Finalist
2017 Build-Off Finalist
2018 Build-Off Top 3 Winner
2018 Build-Off Top 3 Winner
2019 Build-Off Top 3 Winner
2019 Build-Off Top 3 Winner
2021 Winner of Winners
2021 Winner of Winners
1st Place Build-Off 2022
1st Place Build-Off Winner 2022
10,000 POSTS!
10,000 POSTS!
2024 Build-Off Entrant
2024 Build-Off Entrant
Age : 49 Join date : 2016-09-06 Points : 15677 Posts : 10988 Location : Oklahoma
If you are going to go with the angle like that, methinks you should add gussets for looks and strength.
Yeah, There will be more to the front end than what you see.
diddie wrote:
it's a little nerve racking committing to modifications sometimes ! But you just have to jump in and do it and hope it turns out like you see it in your vision.
MightyRaze wrote:
Well, I am committed to the extension now!
First cut is the hardest!
PROJECTS: Marshal ........................93 Craftsman GT6000 Red Bandit ...................72 Wheel Horse Raider 12 Dirty Rat........................77 Sears Suburban Bowser...........................01 Murray Widebody LT The Green Machine ....1990 Craftsman II GT18 Other projects
No updates past 2 days and don't expect any for a couple more.
Here's the scene outside the MightyRaze Garage.
Not too much, but not bad for Oklahoma. 6-8 inches with some 1'-1'4" drifts in the yard. Over by the interstate a few miles away in the open are some 5-6 foot drifts.
Yeah, I could still work, but I have the outside dogs hunkered down in the Garage. I don't want to grind and weld with animals in there. Easier to just put it on pause. Hard to believe it was 74 degrees a couple days ago.
PROJECTS: Marshal ........................93 Craftsman GT6000 Red Bandit ...................72 Wheel Horse Raider 12 Dirty Rat........................77 Sears Suburban Bowser...........................01 Murray Widebody LT The Green Machine ....1990 Craftsman II GT18 Other projects
Yeah, I could still work, but I have the outside dogs hunkered down in the Garage. I don't want to grind and weld with animals in there.
Well, sad day. Nothing done. I will say, I no longer have a hold-up in the garage. Our grandma dog whom we have expected to pass on for about a month now finally passed this morning. She was having a hard time this morning walking to the door to go out. I picked her up to help her out and she passed in my arms. It's all good, she was an old dog. She was gotten to be an inside dog, but she was having none of that. She loved outside. I know as she got old, she hated being brought in when cold. Sometimes she would be stubborn to come in.
Back on topic:
I'm kind of struggling where I am going to go now with the Dirty Rat. I've been moving along pretty well with the build. I'll get the tie rods back on along with the new steering rod. With the heims, I expect near zero slop in the steering. Then I guess it is time to put the engine back on to arrange final belt alignment and purchase the belt. As long as the gov doesn't screw me over on taxes and I get my bonus from work next month. I could be done with the tractor by April sometime. I need to look at this thing and see where I would like to take this thing from here.
PROJECTS: Marshal ........................93 Craftsman GT6000 Red Bandit ...................72 Wheel Horse Raider 12 Dirty Rat........................77 Sears Suburban Bowser...........................01 Murray Widebody LT The Green Machine ....1990 Craftsman II GT18 Other projects
Really sorry to hear of your loss. We lost our cat in 2020, a cat we had since a kitten she was 20 years old. We do so much for our furry friends, buy their food, pay for their medical, get them toys and lots of love and somehow they seem to give us more than we put in.
Nevadablue likes this post
diddie Member
2022 Build-Off Entrant
2022 Build-Off Entrant
Age : 57 Join date : 2016-10-02 Points : 3431 Posts : 411 Location : Indiana
Subject: 
January 31st 2022, 8:48 pm
