60's Springfeild Mini Speed Tractor

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

old and whether worn lol

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

Thought you said 14"? 75$ is not bad is a good deal.

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

Thought you said 14"? 75$ is not bad is a good deal.

Yea, 14's rear 12's front should look good. The 9's I have right now are to small. Even for a mini tractor.

16s all around are where its at red. Why not lol

I broke the quote button   

But where do you find 14" rear's? and what size rim 8"? I havent seen that anywhere. But maybe that's cause I want wide tires.

Thunderdivine wrote:

I broke the quote button   

But where do you find 14" rear's? and what size rim 8"? I havent seen that anywhere. But maybe that's cause I want wide tires.

I think JD rer rims are 6"? Not sure, probably 8", my front tires on the mtd are 16"s and a 8" rim. My dads Aries snowblower has 14's I think on 6" rims.

TroyBilt Pony wrote:

16s all around are where its at red. Why not lol

Because that's not mini. I'm trying to keep the small theme..... Stock tires were 10's front and 11's rear

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

Thought you said 14"? 75$ is not bad is a good deal.

Yea, 14's rear 12's front should look good. The 9's I have right now are to small. Even for a mini tractor.

Sheesh you guys quote each other a lot! LOL

LAWN MOWER MUDDER wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

Thought you said 14"? 75$ is not bad is a good deal.

Yea, 14's rear 12's front should look good. The 9's I have right now are to small. Even for a mini tractor.

Sheesh you guys quote each other a lot! LOL

Yea..... takes a while to load now

lol it wouldnt even let me talk on it

TroyBilt Pony wrote:

redlinemotorsportts wrote:

LAWN MOWER MUDDER wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:

Thunderdivine wrote:

Im just waiting for your "Cut hood picture" so I can chop mine too  

hell it will be driving before i touch the hood lol goes in the "decorative" section of the build lol.

oh   damn, lol I'm scared i'll cut mine to short. Sucks with no engine!

Then wait! your craftsman need some attention!

Nope, The craftsman is waiting for a bearing support.

And any progress on this? I'm eager to see your progress   

Nope I need to order parts before I can do anything.

Actually 4 tires I'm looking at run around $75.
Pshhh, excuses   

Im acually seing if i can sell a r/c roller or SOMETHING so i can order 4 new tires, front bearings, bmi spindles and junkyard rear rims..... Then i can start fab

Do it! tires are amazingly expensive.

I got a fast comp and it just took me 30 seconds to load this... lol
Oh im not getting race tires..... im getting ones to keep the theme hehehehe

Racing?, old worn turf's are even expensive.

4 tires I'm looking at should run me $75 ish with tubes. Joys of having small tires.

Thought you said 14"? 75$ is not bad is a good deal.

Yea, 14's rear 12's front should look good. The 9's I have right now are to small. Even for a mini tractor.

Sheesh you guys quote each other a lot! LOL

Yea..... takes a while to load now

before i decided to use my mini to build a go-kart for my niece's i was planning on 18" rears and 16" fronts, why not run those, they are common on almost every mower lol

Holy chit that's a lot of quotes     good progress on the build so far

Lookin forward to this build. Real nifty!

thats a cool little mower

hopefully ill do something with it soon. i already have some ideas as far as tranny mounts, and all i need is tires, rear rims, bmi spindles. soon...... Its cold out!!

Cool keep us updated. and its cold here too 20 below 0

yeah, it is cold here to.

Thank's for the weather report guys    NOW! Let's see some progress    

Thunderdivine wrote:

Thank's for the weather report guys    NOW! Let's see some progress    

Here thunder...


Split 6"x6" rims with snapper hubs-BUT WAIT THERES MORE!-one snapper hub had a 1" or something inner DIA bore then the other witch is 3/4". Why?! Gurrrrr.......... didnt realise till i was home. oh well another one will be cheap, and there plenty of snappers out there. The hubs are off a jacobsen rer.

Thunderdivine wrote:

Good, now you'll need tubes tho, if you don't gonna weld em solid.

Yea I already planned on getting tires with tubes. Should all work out

So what's your plan on steering?