My monster Murray build

Well here's what I got so far on building my Monster Murray Build, I plan on doing a radius arm suspension with a panhard bar

here it is stock

here are the links

here are the links mounted to the original axle

here is the axle sitting about where it will be

here are the shocks, they came off of an old Suzuki lt125

here are the shocks bolted in

here is the panhard bolted in, its going to be a little over 12'' tall
[/url]
here it is, I still have to do the rear. I plan on locking the MST-205, putting two pillow blocks in for extra support for when I extend the input shaft.

making hubs out of the old rims, to mount to the 22 x11 x10 tires

here it is bolted in

Looks pretty cool man! How good does the suspension work? Is it stiff?

Its a little stiff, but I'm not worried about stiffness, as long as it has some,

Nice! I suppose once it's on all fours and driving, the suspension will probably be less stiff.

Nice build! I like the panhard rod arrangement. How much flex are you looking for?

Nice front end setup. Do the shocks and panhard bar keep the front axle from twisting forward and backward?

The panhard bar is more for making the axle still, so it doesn't move side to side. its not really for flex, just something different then using the stock mower axle setup. This is the second one I'm building, I wasn't on ATLTF.com at the time of me building my first lifted mower.