TD's John Deere 210 R - "Help I Shrunk my John Deere 210"!

Yea it does look like a nitrous bottle thats really cool Very Happy

richie thomas wrote:: 1/4" steel? thought you were using aluminum?
still tho, it looks good man, you just cant get notches cut the clean with a angle grinder and cut-off wheels

I was, but after looking at the mounting location on the Craftsman frame, it was like a swiss cheese so no place to bolt it down. So changed it to steel.
It's 13/32" steel so almost twice the thickness as 1/4". And it weights 8.2lb Very Happy

And you could make it almost as nice with an angle grinder, but this took me 10-15min to cut in the watercutter.

john - TD's John Deere 210 R - "Help I Shrunk my John Deere 210"! - Page 2 D20970A0-085C-42E5-9CB7-8764E31A569D_zpshsqjrjkw

john - TD's John Deere 210 R - "Help I Shrunk my John Deere 210"! - Page 2 54C80719-9EC3-4F9B-BC4D-246802C82A86_zpsdcp36cnf

Craftsman1998 wrote:: Yea it does look like a nitrous bottle thats really cool

More than enough beef brother... Once you figure out what all you need, you can chuck it back in the cutter for some lightening holes

Lawren Wimberly wrote:: More than enough beef brother... Once you figure out what all you need, you can chuck it back in the cutter for some lightening holes

Good Idea

I'm just full of 'em.... well full of sumthin Laughing

Hey Thunder,

Do you have the bolt pattern for the 700 written down?
If you could release that information it would be GREAT.

JamisonCampbellRacing wrote:: Hey Thunder,

Do you have the bolt pattern for the 700 written down?
If you could release that information it would be GREAT.

Not really but here's my "work" drawing. Note it needs to be flipped for Standard mount use, and the measures is in Millimeter Very Happy

john - TD's John Deere 210 R - "Help I Shrunk my John Deere 210"! - Page 2 354F112C-60E5-4E8B-9930-457E8F127FD1_zpsxhiwa3u9

Where should I sit? lol

john - TD's John Deere 210 R - "Help I Shrunk my John Deere 210"! - Page 2 431E6C91-000D-4288-84D5-1CD142E1BF4C_zpsrzy4rdde

See, it wasn't that bad!

redlinemotorsportts wrote:: See, it wasn't that bad!

I even started to cut it at the wrong line, but there's really not much room left for my: not sixpack! but my keg.
I Might have to go on a diet to be able to drive it Very Happy

Thunderdivine wrote:: Where should I sit? lol

I KNOW ya didn't just hand me THAT line affraid

Seriously though, I'd put the seat as far back and as low between the back tires as you can get... maybe even hang the seat off the back (have some rollers on the bottom for wheelie protection Cool

Lawren Wimberly wrote:

Thunderdivine wrote:: Where should I sit? lol

I KNOW ya didn't just hand me THAT line affraid

Seriously though, I'd put the seat as far back and as low between the back tires as you can get... maybe even hang the seat off the back (have some rollers on the bottom for wheelie protection Cool

I DID, lol

And yeah good idea, but I kinda wanted to sit in front of the rear axle.

yea, been there thunder. i get everything in place as a very crude mock up and go "ah *****, this isnt what i was thinking..... but i like it!"

redlinemotorsportts wrote:: yea, been there thunder. i get everything in place as a very crude mock up and go "ah *****, this isnt what i was thinking..... but i like it!"

I like it, but I wish I had the rear fenders. Maybe I'll just skip it.

Thunderdivine wrote:

redlinemotorsportts wrote:: yea, been there thunder. i get everything in place as a very crude mock up and go "ah *****, this isnt what i was thinking..... but i like it!"

I like it, but I wish I had the rear fenders. Maybe I'll just skip it.

I am, no fenders, not like im ridint in rain.....or will I? Hmm, that would make a good video

redlinemotorsportts wrote:

Thunderdivine wrote:

redlinemotorsportts wrote:: yea, been there thunder. i get everything in place as a very crude mock up and go "ah *****, this isnt what i was thinking..... but i like it!"

I like it, but I wish I had the rear fenders. Maybe I'll just skip it.

I am, no fenders, not like im ridint in rain.....or will I? Hmm, that would make a good video

I will, nice rooster tail.

Moved the 700 mount plate as close as it can be mounted to the axle I think.

john - TD's John Deere 210 R - "Help I Shrunk my John Deere 210"! - Page 2 0948A4A5-BCA3-4A23-88C8-453A81AE759B_zpsutwhvme8

Shifter ideas yet??

redlinemotorsportts wrote:: Shifter ideas yet??

Yes and no. Depends on to much for now. Rearfender and so on.

Rear fender? No ones got time for that! Heh, i think most of your space out back was squished because of how far back your engine is. Im interested in steering too Very Happy

redlinemotorsportts wrote:: Rear fender? No ones got time for that! Heh, i think most of your space out back was squished because of how far back your engine is. Im interested in steering too

Yea but the plan is to shrink the fender in all directions.

And do you see the yellow marker mark, thats where my engine will end, so the steering shaft will go down into the little hole right aft of the engine.
Well that's the plan anyways.

Looks like an OG mini hood the way you cut it Thunder. Gonna be interesting to see where you sit though lol. Maybe a pull behind trailer? Razz

Head Forum Administrator ** Chat Moderator ** Facebook Page Admin
ATLTF Facebook Page ** Chatbox ** How To Upload Pictures

_X_ FORUM ANNOUNCEMENTS _X_

Have a question? Ask me! Type in "@Doug" in your post!

Your ATLTF Staff:
Administrators: @Doug, @MightyRaze, @"Doc Sprocket", @Stretch44875
Moderators: @TheRainbowBoxer, @AllisKidD21, @Brianator, @RichieRichOverdrive

Doug Fackler wrote:: Looks like an OG mini hood the way you cut it Thunder. Gonna be interesting to see where you sit though lol. Maybe a pull behind trailer?

Ha ha and def. NO pull behind something. Very Happy