17hp MTD Build turbo

I'm not sure, but to be honest, I think you should just leave it. It looks downright mean like that. Put some nice LED's in it and the cover back on and I'd call that good to go!

I'm leaving the middel open I'm just going to cap the headlights off so the function like they should

Nice looking setup with the Turbo cant wait to see how it preforms.

So your basically going to cut the lens in half, and somehow fuse sides to them to have two separate lens?

I've been using this stuff for years on a wide variety of projects:

https://www.amazon.com/3M-08115-Panel-Bonding-Adhesive/dp/B000PEW4MI/ref=sr_1_1_sspa?gclid=Cj0KCQjw9pDpBRCkARIsAOzRzitGz-d28cYakWRFSXKmv6e2Yz1ru5PO3uEpR2OtIpa5x7_5JmQuYvgaAt6-EALw_wcB&hvadid=323755615845&hvdev=c&hvlocphy=9026886&hvnetw=g&hvpos=1t1&hvqmt=b&hvrand=15599657075751894223&hvtargid=kwd-47267115853&hydadcr=25246_9775734&keywords=3m+panel+bond+08115&qid=1562703234&s=gateway&sr=8-1-spons&psc=1

Well some parts for the rear suspension came in today I'll try to do something with that tonight or tomorrow

Well got a few mins this morning to start on the rearend I'll work on it some more tonight when it's not so damn hot out lol

Well I didn't make it to town to get the bolts for the rear axel but I did get the clutch installed on the engine

Lol, you could've came and picked up a few of those bearings from me. I have an excess of them actually, came from a machine my dad's work was scrapping. What kind of clutch is that? Seems interesting. If you're using a chain off it make sure it has lots of support.

I work on stuff in the evenings too- just too hot and humid around here to work on them during the day.

The cluch is made by north American cluch out of Milwaukee, WI a buddy had it for another build but went a different route they clame it's good for 32hp I'm not sure about that but for free we will see how it does

Yeah, not much to lose. Any idea what the engagement rpm is?

Well did some trading got a peerless gear box,a axel five 8" rims and 2 12 time rim's for a old kids atv motor I had laying around

A little more work to the rear end thses are just temporary tires all I had that was same size

Well rear wheels are mounted

Well by flippin the hubs around then I took a 38mm hole saw drilled the center out of the rim then i drilled them for lug studs haven't decided yet but I'm thanking about stepping up to 3/8 studs if not I'll just get longer 5/16 bolts and keep it how it is now

I'll probably end up with 18 inch tires in the front just because I have a good pair the one mounted is a 20 inch