[DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry]

MatthewD wrote:: Box steel for reinforcing looks good. How about making a subframe to go inside the stock frame? That would be slightly less complicated but would achieve the same result.

Impossible to do since I need to change everything then... Will take a closer look to that Rig soon & figure out a final reinforcement plan!

This is my current plan on how to solve the frame reinforcement...

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Widebo11

With this Method I would also get the Belt outta the trap with the steering wheel so belt changes would be way easier, I dont need to cut the fenders to fit the 22" Rear Tires, & the old frame just acts as a part where the body mounts to... I just need to extend the shifter linkage to get the shifter back into alignment, IMO a good solution!

WHAT DO YA THINK ABOUT IT???

Looks like a good plan. Now stop painting and get welding! haha

TheBeal wrote:: Looks like a good plan. Now stop painting and get welding! haha

need to clean the frame up, cut the Box steel, get welding magnet squares, ............ lots of work, Wo'nt do anything on it this weekend...

I just checked out this thread for the first time. Nice build plan stick with it! When you said 22×11×8 mudlites and quiet/loud mode exhaust I thought of Doc's Fugazi.

mowerjunkie03 wrote:: I just checked out this thread for the first time. Nice build plan stick with it! When you said 22×11×8 mudlites and quiet/loud mode exhaust I thought of Doc's Fugazi.

Yah, it's kinda copy of his Widebody....

Just missing the Vanguard (I could easily throw in if I want )
But I will Not copy his Hood design, also not the Exhaust. havent decided yet how I want to run the Exhaust, but prolly goin for a short stack that has a connector somewhere in the lower area so I can pull the stack & slap a muffler on the flange...

Also goin for different Front tires I guess..

DANG IT! Need to get my ass outside to work on the damn frame!

Yea when some sort of offroad tire is on a mower and the stock turfs are still on the front it makes it look like junk no matter how well built it is.

Murraymountain wrote:: Yea when some sort of offroad tire is on a mower and the stock turfs are still on the front it makes it look like junk no matter how well built it is.

IDC about the look but U cant steer with 22" Ags in the rear & locked diff & turf slicks in front...

Lean hard....

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Sig115

PROJECTS:
Marshal ........................93 Craftsman GT6000
Red Bandit ...................72 Wheel Horse Raider 12
Dirty Rat........................77 Sears Suburban
Bowser...........................01 Murray Widebody LT
The Green Machine ....1990 Craftsman II GT18
Other projects

> > > ATLTF Staff < < <
How To Upload Pictures

Have a question? Ask me! Type in "@MightyRaze" in your post!

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Sig214

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Sig314

It more has to do with front end weight than tires. If there was a 150 pound cast iron Kohler oppy up there, it'd be fine. If it was a 15 pound push mower engine, you'd have issues.

SebastianAlbrecht wrote:

Murraymountain wrote:: Yea when some sort of offroad tire is on a mower and the stock turfs are still on the front it makes it look like junk no matter how well built it is.

IDC about the look but U cant steer with 22" Ags in the rear & locked diff & turf slicks in front...

Yea I see what you mean.

MightyRaze wrote:: Lean hard....

Prolly gettin Ags or Knobbys for the front I guess rn

Double W Cross Ranch wrote:: It more has to do with front end weight than tires. If there was a 150 pound cast iron Kohler oppy up there, it'd be fine. If it was a 15 pound push mower engine, you'd have issues.

Hope the OHV is heavy enough, but not too heavy since U need enough weight @ the rear to have good traction!

Murraymountain wrote:

SebastianAlbrecht wrote:

Murraymountain wrote:: Yea when some sort of offroad tire is on a mower and the stock turfs are still on the front it makes it look like junk no matter how well built it is.

IDC about the look but U cant steer with 22" Ags in the rear & locked diff & turf slicks in front...

Yea I see what you mean.

Yeah LOL

The B&S OHV's are pretty darn heavy. I had trouble removing mine.

Off topic:

Off topic:

Off topic:

Got some Goodies for it coming in the Mail Yesterday!

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Whats115

Build -Off - [DQ'd Member Banned] SebastianAlbrecht's Murray Widebody Offroad + Trail Mower [2019 Build-Off Entry] - Page 3 Whats116

4 LED Backlights! Gonna use 2 of them on the Widebody, the other 2 on the AYP!

Need to pause this Project now, since the MTD has to be finished first!

Should look pretty good. How bright are they?

Murraymountain wrote:: Should look pretty good. How bright are they?

Connected them to a 12V Battery in the bad lighted shop & they were a bit brighter than the Stock front Light bulbs so I guess they should do the Job that someone else can see U when U drive the Widebody in the dark.

Nice lights! They will look nice mounted up.

PROJECTS:
Marshal ........................93 Craftsman GT6000
Red Bandit ...................72 Wheel Horse Raider 12
Dirty Rat........................77 Sears Suburban
Bowser...........................01 Murray Widebody LT
The Green Machine ....1990 Craftsman II GT18
Other projects

> > > ATLTF Staff < < <
How To Upload Pictures

Have a question? Ask me! Type in "@MightyRaze" in your post!

Cool! Ya see I'm too cheap for that so I use $4 Walmart trailer lights. That's why your lights will hold up longer than mine lol!

.

MightyRaze wrote:: Nice lights! They will look nice mounted up.

THX

Murraymountain wrote:: Cool! Ya see I'm too cheap for that so I use $4 Walmart trailer lights. That's why your lights will hold up longer than mine .

IDK H much these were... AFAIK 10$ for all 4 or so...

Off topic:

Off topic:

That's all why the Widebody is currently way down on the list of stuff that has to be done soon....

No problem! Just didn't want to see it fall out of the competition.

Murraymountain wrote:: No problem! Just didn't want to see it fall out of the competition.

Thank U alot!

» [DQ'd Member Banned] MUD MURRAY Woods-Offroader [2019 Build-Off Entry]
» 1997 Murray widebody trail mower
» [FINALIST] - Murraymountain's Mountain Murray [2019 Build-Off Entry]
» [Rules DQ] - James Yoder's Frankenstein 2.0 2019 build off entry [2019 Build-Off Entry]
» [FINALIST] - Scrap yard murray save [2019 Build-Off Entry]