6wheel 4wd

Hi everybody
mark from nsw Australia
I purchased a cheap ebay quad few years back.
it sat for about 5 years doing nothing.
then I had a spark.
long story short I stripped the wheels motor and few parts.
made a new chasy bought new set of wheels and alix along with the sprocket hubs
its now 6 wheel with 4wd or 2wd the swing arm powered buy a 600N actuator.
Can pivot lifting either sets of rear axils off the ground.
results in self loading onto a trailer or can be used as short wheel base 2wd  4wd or 2wd long wheel base.
The motor a 125cc will be used for light duties.
But I went a step further and modified a which motor to run a motor bike chain.
this gives awesome pulling pushing power.
the idea behind the winch is for grading used along with actuators its going to be a multi purpose garden tractor mower.





I've completed the drive line I'm working on lifting arms atm then the bucket.

then I have a idea of 10mm plates with teeth cut into both plates
and having a slinding system driven by a petrol engine
basically a hedge clipper on steroids that will mount to the drive unit just like the buck will.
I'll upload pictures when I work out how to.
its not complete but  I'll upload more as I progess

Hope you all get a kick out off it

Welcome to the forum! Another Aussie in our midst. Feel free to contact me if you need any site help. Theres a few links in my signature below that might be of use to you.