Stiff peerless 5 speed 801-038B

Subject: Stiff peerless 5 speed 801-038B June 10th 2015, 10:32 am

I've got a tecumseh peerless 5 speed and the input shaft is very stiff to rotate. I have had it apart and all the bushings are seated correctly. The whole transaxle is in good condition and so it seems strange that it is so stiff. The motor does drive it but is there is some belt slippage due to the power needed to drive the input shaft. I had one of these transaxles before with a similar problem. Does anyone know why it may be like this?

Subject: Re: Stiff peerless 5 speed 801-038B June 10th 2015, 5:05 pm

Mine was brand new and is like that, all how they are geared i guess.

» Peerless 633 3 speed hi low. low not working
» Make a 12-Speed Transmission from a 6-Speed Transmission?
» Low Speed Tractor w/ Peerless 820 + Automatic Transmission Fluid = ?
» 820-037 Peerless Manual shift 5-speed Dimensions and Mounting holes location.
» CVT going to a 5 or 6 speed....For high speed tractors: Vario drive clutch, going to MST205 or 206