Peerless Brake Idea

Any Mounting ideas guys ???
[img][/img]

weld it? or bolt it on. obviously with the size difference welding is your best bet

welding might be the best thing to do just make sure its centered

Bolt if you can, weld if you must. Just get that sucker concentric!

ok I will take it tmrw to my job and see if the guys can help me out 3 heads are better than one lol . ill keep you guys posted

so what are you doing with this. obviously its a brake upgrade but how are you doing it

this will be going on my murray widebody im building right now I found a hydro caliper and I just need to fix my master cylinder but I have those parts just brainstormin now

if I can mount it on the little disk then its going on the stock location on the transaxle

WilliesBuilds wrote:

if I can mount it on the little disk then its going on the stock location on the transaxle

thats cool

are you going to run it as a hand or foot brake

im thinking hand brake but id love a foot brake but idk where to put It

I'm imagining the floorboard to be a good starting point...

On our tractors, we put our brake pedals on the same side as the gas, just further back... it seems like it would be awkward, but it's pretty easy to get used to.

Makes sense, really. Assuming you have a left-foot clutch and a right foot throttle- it stands to reason you'd put the brake with the throttle. It's pretty common to need to operate the clutch and brake at the same time, less common to have to work the throttle and brake without the clutch...

yeah that's exactly my worry but ive done it before and havent had problems but I want to mount the pedal and make it look good last time I did it was just an ugly quick fix , but atleast it worked.