Belt size help

Subject: Belt size help January 30th 2013, 5:22 pm

I just successfully completed a pulley swap on my Murray Very Happy

. I replaced the old transaxle pulley with a smaller one. My old belt was a 37x87. I have to take 3 inches off of it to make it fit. Obviously you cant just cut and weld a belt back together so I need to know what I need for a replacement belt, don't know a lot about sizing of belts and whatnot and Google didn't help, any help at all would be greatly appreciated. Question

Subject: Re: Belt size help January 30th 2013, 5:36 pm

If you know it needs 3" less then go to a hardware stroe and buy a 3" shorter belt.

Head Forum Administrator ** Chat Moderator ** Facebook Page Admin
ATLTF Facebook Page ** Chatbox ** How To Upload Pictures

_X_ FORUM ANNOUNCEMENTS _X_

Have a question? Ask me! Type in "@Doug" in your post!

Your ATLTF Staff:
Administrators: @Doug, @MightyRaze, @"Doc Sprocket", @Stretch44875
Moderators: @TheRainbowBoxer, @AllisKidD21, @Brianator, @RichieRichOverdrive

Subject: Re: Belt size help January 30th 2013, 6:58 pm

For my mower i cut the belt in 2 and got my right measurement by cutting. Then layed it straight and measured it with a tape measure then i got my belt. Easy

Member Join date : 2012-06-10 Points : 4871 Posts : 302

If you need to find out the belt size, try this http://www.blocklayer.com/pulley-belt.aspx

Subject: Re: Belt size help January 31st 2013, 9:59 am

Take a rope and use it as a mock up belt and use it to size

Subject: Re: Belt size help April 5th 2013, 1:35 am

CornishMorgan wrote:: If you need to find out the belt size, try this http://www.blocklayer.com/pulley-belt.aspx

This is sweet tool to calculate MPH and what your max/min pulleys can be.

» what belt size should i need
» belt size help and pulley
» How do i find the belt size?
» whats the drive belt size for a bolens stg 125
» If a 90" 5/8 notched belt fits will a 90" 1/2 belt fit?